The process for generating all the necessary manufacturing files is very simple in Eagle, and different to most other design software. You can use a CAM Job file to export them for you. These files are pre-configured by Logic Need to ensure that all the necessary files will be exported from your design, in the correct format, to place an order at Logic Need PCB Service.

1-	Download our pre-configured CAM Job file To download our pre-configured CAM Job file Click here File Version: A2 File Name:  LogicNeed_Eagle_GerberRS274X_Generater_Ver_A2.cam File Description: This Job file is suitable for Autodesk Eagle version 8.5 or earlier ONLY
2-	Open your design in Eagle and click the CAM icon, this will bring up the CAM Processor.
3-	In the new window, open the CAM file by going to File -> Open -> Job
4-	When the Open CAM Job dialog opens locate the file that you downloaded (in step 1) and open it. Please make sure you are using the Logic Need CAM file, the default Eagle 274 files will not export the files correctly and may result in errors.
5-	The CAM file will export all the required layers, including the drill file in Excellon format and will name the files with our preferred extensions. Click Process Job to begin the export process.
6-	The manufacturing files will be exported in the same location as your design files. Please check that the ten manufacturing files have generated. Place these files into an archive file (ZIP or RAR).
7-	Upload this archive file (ZIP or RAR) into the Logic Need PCB Service order page. Now, you are done. (We recommend that you give the files a quick check using any Gerber viewer software or online Gerber Viewer before confirming the order)

Generate Gerber and Drill files by using our helpful pre-configured CAM Job file:
    - For Eagle version 8.5 or earlier
    - For Eagle version 8.6 or above

▪	For more information about Excellon file format  [click here]